Degree Controls' COVID-19 Response and Action Degree Controls' COVID-19 Response and Action
Home / DegreeC Blog / Air Filtration for Safer Indoor Air
Air Filtration for Safer Indoor Air

Air Filtration for Safer Indoor Air

Air Filtration for Safer Indoor Air

ASHRAE statements regarding transmission of SARS-CoV-2 convey that ventilation and filtration provided by HVAC (heating, ventilating, and air-conditioning) systems can reduce the airborne concentration of Covid-19 and thus lower the risk of transmission.

HEPA (high efficiency particulate air) filters are air filters designed to stop or capture very small particulates from an air stream at a highly effective rate. According to the U.S. Department of Energy, to qualify as HEPA, a filter must remove at least 99.97% of particles when tested with an aerosol with a size of 0.3 microns.

Airflow and Airflow Sensors for Indoor Air Quality

Airflow and air velocity sensors play a major role in indoor air quality and air filter selection, operation and performance:

  • Filtration efficiency, or the ability of the filter to remove contaminants from air passing through the HVAC system, is a big factor in filter selection. HEPA filter test standards establish efficiency under a specified air flow, and this data is included in manufacturer’s specifications.
  • Filters should be used at their rated pressure drop and face velocity to be most effective. Filter face velocity is the measured air velocity entering the filter, and the pressure drop of a filter is a measure of its resistance to airflow through it, given for specific face velocities. Rated pressure drop increases with air velocity.
  • Although there are HVAC situations where increased airflow is beneficial, HEPA filters may experience a decrease in collection efficiency if they are operated at a face velocity exceeding manufacturer's specifications.

Conduct Periodic and Quantitative Airflow Testing

The control of airborne particulates is dependent upon many factors which include filter efficiency, air velocity and airflow uniformity. Airflow measurement and monitoring will allow you to identify any variations that might adversely affect filtration and system performance and thus increase the risk of contamination. Single or multipoint air velocity sensors should be used to measure face velocity across filters and verify flow at strategic points in the system. Airflow visualization products should be used to verify airflow patterns and identify turbulence which may negate the clean spaces you’ve worked so hard to establish. Our handheld foggers are portable, easy to use and show real-world airflow patterns immediately.

Stay Safe

Degree Controls will continue to support businesses worldwide as they adapt to the ongoing threat of Covid-19. Contact a DegreeC representative at sales@degreec.com for airflow products and product support. Please take care, and stay healthy and safe during these challenging times.

VIDEO: Airflow Sensors

Airflow Products for Health & Well Being

Airflow Switch for HVAC Duct

Airflow Monitors

The Rooster™ Monitor200 with BACnet® MS/TP capability from Degree Controls represents a new generation of airflow monitoring and alarming for chemical fume hoods, biosafety cabinets, and a wide range of critical containment applications where airflow is to be monitored, alarmed, and communicated to building management systems (BMS).

Airflow Sensor for Health and Well Being

F Series Air Flow Sensors 

The F-Series is a platform of non-directional air velocity and temperature sensors optimized for demanding applications including laboratory, HVAC, high-performance electronics, and more. With both digital and analog outputs, which can be used simultaneously, the F-Series transducer sets a new standard in flexible design integration and airflow control.

Airflow Visualization for Health and Well Being

Airflow Visualization

With the DegreeC portfolio of sanitary, FDA-GRAS fog generators and accessories, certifiers, pharmacy managers, engineers, and HVAC technicians can detect leaks, test HEPA filters, and monitor turbulence in ventilation systems with greater safety and precision than toxic alternatives such as smoke sticks.

Consult with a Airflow Sensor Specialist

* indicates required

Please select all the ways you would like to hear from Degree Controls, Inc.:

You can unsubscribe at any time by clicking the link in the footer of our emails. For information about our privacy practices, please visit our website. We use Mailchimp as our marketing platform. By clicking below to subscribe, you acknowledge that your information will be transferred to Mailchimp for processing. Learn more about Mailchimp's privacy practices here.


Jan Fischer  
Having joined DegreeC in 2009, Jan has over a decade of experience consulting professionals in a wide range of industries on methods for using airflow sensors and instrumentation to collect data for testing and analysis.